OWC Accelsior S PCIe Adapter for 2.5" SATA III SSD Drives and OWC 2.0TB Mercury Extreme Pro 6G SSD

OWC Accelsior S: Storage Expansion With a Speed Boost . Add a 2.5" SATA 6G Drive to your Mac or PC.Directly mount any standard 2.5" drive. With more than 500 MB/s of throughput, the Accelsior S dual-lane PCIe 2.0 card delivers flexible storage expansion, with a speed boost, to your Mac or PC. Mount a 2.5" drive to the Accelsior S, install in any available PCIe x4 (or greater) slot. Use as a native, high-speed, boot drive or scratch-disk and boost capacity and performance. no drivers or extra software needed. OWC Part Number: OWCSSDACL6G.S - Form Factor: full height, half length - PCIe-SATA Bridge: ASM1062 - Interface: PCIe 2.0 x2 - AHCI Compliant: Yes, Plug and Play Installation, no drivers required - RoHS Compliant: YES -Performance: Read: up to 550MB/s, Write: 530MB/s - Operating Temp: 32°F to 158°F/0°C to 70°C - Non-Operating Temp: ?40°F to 185°F/?40°C to 85°C - Acoustics: 0.0 bels for both Idle and Seek - Operating system compatibility: Mac OS X 10.6 and up, Windows Server 2008 and higher, Not compatible as a Windows boot drive on a Mac - Supported Mechanisms: All 2.5" HDD and SSD SATA 1.5, 3.0, 6.0Gb/s. Controller: Silicon Motion SM2246EN Series with 7% Over Provisioning firmware set; NAND: Tier 1 3D; Form Factor: Standard 7mm 2.5";Interface: SATA 6Gb/s, 3Gb/s & 1.5Gb/s supported, SATA 3.0 Compliant; Capacity: 1920GB useable capacity, Total Flash Memory Components - 2048GB, 128GB allocated to real-time data redundancy & error correction;Formatted Capacity: 1860GiB;Manufacturer Model Number: OWCSSD7P6G02S; RoHS Compliant: Yes; Format: Unformatted;Sequential Reads (6Gb/s, Compressible Data):525 MB/s; Sequential Writes (6GB/s, Compressible Data):402 MB/s;Sequential Reads (6GB/s, Incompressible Data):515 MB/s;Sequential Writes (6Gb/s, Incompressible Data):407 MB/s